TOP GUN COMPRESSOR For Galaxy Ranger RCI Connex General Lee Saturn 2517 & Others

Description

Comes With Our Own Pictorial Install Sheet!
TOP GUN CP-1 Compressor
Now the same Top Gun Modulator MD-1 and Compressor
CP-1 circuits used in the new Magnum radios are available for most other
10-meter and many CB radios. Full tone, clear, high swing audio (AM)
modulation is achieved with the addition of these two fully assembled
micro circuit boards. While the Top Gun Modulator works only in AM, the
Top Gun Compressor works in AM, FM, and SSB keeping the modulation at peak
performance in all these modes.
These circuits work with or without the modulation
limiter. For the purest, the limiter can be adjusted for excellent forward
swing without any square wave audio. Without the limiter the compressor
maintains high-level audio without severe squaring of the audio signal. It
is the squaring of the audio peaks that create the distortion and splatter
of adjacent frequencies.
On 30-50 Watt radios, the dead-key or carrier can
be set to 1 Watt or less with a modulation swing to the full output
potential of the radio transmitter. On 100-200 Watt radios, the Dead-key
or carrier can be set to 10-15 Watts with a modulation swing to the full
output potential of the radio transmitter. These high power radios require
the addition of an optional 15 K resistor. The modulator can be switched
to normal swing with the installation of an optional SPST or SPDT switch.
Even in the normal swing mode, the Top Gun Modulator is still working to
keep the audio clean at all power levels.
Top Gun  CP-1 Compressor For 10 Meter Radios
* Fits Many Models of Radios Some Not Shown Above
* Some Soldering Skills Are Required
* EZ Instructions Included See Pictures Above
* Improves Radio Performance Far Beyond Other Simple
Resistor/Capacitor or NPC Mods!
Please See Top Gun
MODULATOR
For High
RF Power
Swing!
This Listing Is For Top Gun
COMPRESSOR!
COMPRESSOR = Maximum Modulation Peaks Without Over Modulation
MODULATOR = Maximum RF Power Swing With Modulation!
Will Not Work On Radios With Modulation A Transformer!
FREE SHIPPING! Via USPS First Class Mail!
Note: Some Soldering Skills Are Required To Install This Item!
Payment Method
We accept payment via Paypal for items purchased. We ship the item
to the verified address in Paypal.
Please confirm your shipping address in the Paypal Account if it
has changed and verify it with Paypal.
We will not accept responsibility for packages sent to the wrong
address. Please update your info.
Shipping Detail
Most items are shipped within 1 working day unless the purchase
is made over a weekend or holiday.
First Class Parcels usually
arrive within 1 to 6 working days depending on your location.
Certain items have to be shipped via Priority Mail and will arrive
within 1 – 3 working days.
Most packages have a tracking number when they are shipped. Please
allow ample time for transit!
Feedback Policy
We will leave positive feedback to the buyer as time permits but please
don’t be discouraged if you don’t receive it right away! Leaving Negative
feedback or Neutral Feedback is never a good way to resolve problems and
we would appreciate it if you can contact with us with your problem before
leaving Negative feedback or Neutral feedback .We are happy to offer any
help to resolve the problem as fast as possible!
FIND MORE ITEMS IN MY EBAY STORE!
Copyright (C) 20